Cisco Cisco Aironet 350 Access Points Notas de publicación

CSCec29293—The access point no longer immediately drops all client associations when you enter 
the reload in minutes command.

CSCec39405—The following combination of radio settings no longer reduces throughput on the 
802.11a radio in 1200 series access points:

Fragmentation threshold set to 500

RTS threshold set to 256

WPA enabled 

CSCec43028—The access point CLI no longer displays 40-bit WEP keys as 128-bit WEP keys.

CSCin44512—If 8 or more VLANs are configured on your access point, you can now apply filters 
using the Apply Filters page in the web-browser interface. 

CSCin44591—PSPF now works when you use the web-browser interface to enable PSPF on a 
non-native VLAN. 

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Click Technology Support, select Wireless from 

the menu on the left, and click Wireless LAN.

In addition to the CLI commands added to support new access point features, these commands were 
added for IOS Release 12.2(13)JA1:

boot upgrade—Use the boot upgrade global interface command to configure access points and 
bridges to automatically load a configuration and use DHCP options to upgrade system software. 
Use the no form of the command to prevent an access point or bridge from automatically loading a 
configuration and upgrading system software.

dot11 activity-timeout—Use the dot11 activity-timeout global configuration command to 
configure the number of seconds that the access point tracks an inactive device.

For complete descriptions of these commands, refer to the Cisco IOS Command Reference for Cisco 
Aironet Access Points and Bridges for this release.

This section lists documents related to Cisco IOS Release 12.2(13)JA1 and to 350, 1100, and 1200 series 
access points.