Cisco Cisco Aironet 350 Wireless Bridge Manual Técnica

Introduction
 Prerequisites
      Requirements
      Components
      Conventions
 Overview of Local RADIUS Server Feature
 Configure
      CLI Configuration
      GUI Configuration
 Verify
 Troubleshoot
      Troubleshooting Procedure
      Troubleshooting Commands
 Related Information

This document provides a sample configuration for Lightweight Extensible Authentication Protocol (LEAP)
authentication on an IOS

®

−based access point, which serves the wireless clients, as well as acts as a local

RADIUS server. This is applicable to an IOS access point that runs 12.2(11)JA or later.

Ensure that you meet these requirements before you attempt this configuration:

Familiarity with the IOS GUI or CLI

• 

Familiarity with the concepts behind LEAP authentication

• 

The information in this document is based on these software and hardware versions.

Cisco Aironet 1240AG Series Access Point

• 

Cisco IOS Software Release 12.3(8)JA2

• 

Cisco Aironet 802.11 a/b/g/ Wireless Adapter that runs Aironet Desktop Utility 3.6.0.122

• 

Assumption of only one VLAN in the network

• 

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.