Cisco Cisco Packet Data Interworking Function (PDIF) Guía De Administador
System Interfaces and Ports
ATM Interfaces and Ports ▀
Cisco ASR 5000 System Administration Guide ▄
101
Setting the framing method is required to make the card operational.
Entering no shutdown makes the card active.
Creating an IP Interface for Use with an ATM Port
Use the following example to create an IP interface to use with ATM:
configure
context ctxt_name
interface intf_name point-to-point
ip address ip_addr net_mask
ip address ip_addr net_mask secondary
end
Notes:
The context must be the one in which you have or will configure the SGSN service.
You must enter the point-to-point keyword to create the PVC (Permanent Virtual Connection) interface for the
IP over ATM.
Configuring an ATM Port to Use an IP Interface
Use the following example to configure an ATM port to use with an IP interface:
configure
port atm slot#/port#
no shutdown
pvc vpi vpi_num vci vci_num
no shutdown
bind interface ifc_name ctx_name
end
Notes:
The context must be the one you used when creating the IP interface (PVC) for the ATM port.