Cisco Cisco Packet Data Interworking Function (PDIF)
Interchassis Session Recovery
Configuring Interchassis Session Recovery (ICSR) ▀
ASR 5000 System Administration Guide, StarOS Release 16 ▄
341
Step 4
Step 5
Save your configuration as described in Verifying and Saving Your Configuration.
Configuring BGP Router and Gateway Address in Destination Context
Use the following example to create the BGP context and network addresses.
configure
context <dest_ctxt_name>
router bgp <AS_num>
network <gw_ip_address>
neighbor <neighbor_ip_address> remote-as <AS_num>
end
Notes:
AS_num is the autonomous systems path number for this BGP router.
Configuring SRP Context for BGP for Destination Context
Use the following example to configure the BGP context and IP addresses in the SRP context.
configure
context <srp_ctxt_name>
service-redundancy-protocol
monitor bgp context <dest_ctxt_name> <neighbor_ip_address>
end
Setting Subscriber to Default Mode
Use the following example to set the subscriber mode to default.
configure
context <dest_ctxt_name>
subscriber default
end
Verifying BGP Configuration in Destination Context
Verify your BGP configuration by entering the show srp monitor bgp command (Exec Mode).