Cisco Cisco Packet Data Gateway (PDG)
Exec Mode Commands (D-S)
▀ diameter enable endpoint
▄ Command Line Interface Reference, StarOS Release 18
4084
diameter enable endpoint
Enables a Diameter endpoint that is disabled.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
diameter enable endpoint endpoint_name peer peer_id
endpoint_name
Specifies the endpoint in which the peer is configured as an alphanumeric string of 1 through 63 characters.
peer
peer_id
Specifies the Diameter peer host name to be enabled as an alphanumeric string of 1 through 63 characters.
Usage
Use this command to administratively enable a Diameter peer. Also see the
diameter
disable
endpoint
command.
Example
This command enables the Diameter peer
peer12
:
diameter enable endpoint endpoint1 peer peer12