Cisco Cisco Packet Data Gateway (PDG)
ACS Rulebase Configuration Mode Commands
edr suppress-zero-byte-records ▀
Command Line Interface Reference, StarOS Release 18 ▄
689
edr suppress-zero-byte-records
This command disables/enables the creation of EDRs when there is no data for the flows.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
[ default | no ] edr suppress-zero-byte-records
default
Configures this command with its default setting.
Default: Disabled; same as
Default: Disabled; same as
no edr suppress-zero-byte-records
no
Disables the suppression of zero-byte EDRs.
edr suppress-zero-byte-records
Suppresses zero-byte EDRs.
Usage
Use this command to disable/enable the creation of EDRs that are empty. The situation where there is a zero-
byte EDR would typically be possible when two successive EDRs are generated for a flow. This CLI
command suppresses the second such EDR for the flow.
byte EDR would typically be possible when two successive EDRs are generated for a flow. This CLI
command suppresses the second such EDR for the flow.