Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
ipv6 dns-proxy ▀
Command Line Interface Reference, StarOS Release 18 ▄
8875
ipv6 dns-proxy
Configures the system to act as a domain name server proxy for the current subscriber.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ default | no ] ipv6 dns-proxy
default
Disables IPv6 DNS proxy functionality for a subscriber.
no
Removes the pre-enabled functionality of IPv6 DNS proxy for a subscriber.
ipv6 dns-proxy
Enables IPv6 DNS proxy functionality for a subscriber. If enabled, the system will act as a proxy DNS server.
Default: disabled.
Default: disabled.
Usage
Used to enable or disable IPv6 DNS proxy for the subscriber. When enabled, the PDSN acts as a proxy DNS
server for DNS IPv6 queries coming from the mobile station to the PDSN’s local PPP link address.
server for DNS IPv6 queries coming from the mobile station to the PDSN’s local PPP link address.
Example
The following command disables the IPv6 DNS proxy function for the subscriber:
no ipv6 dns-proxy