Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
▀ ipv6 egress-address-filtering
▄ Command Line Interface Reference, StarOS Release 18
8876
ipv6 egress-address-filtering
Configures the system to perform egress address filtering for the subscriber.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] ipv6 egress-address-filtering
no
Disables IPv6 egress address filtering.
ipv6 egress-address-filtering
Enables IPv6 egress address filtering.
Usage
Used to enable the filtering of packets that arrive from the Internet to a particular site.
Example
The following command disables egress address filtering:
no ipv6 egress-address-filtering