Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ encryption-algorithm-lte
▄ Command Line Interface Reference, StarOS Release 18
1968
encryption-algorithm-lte
Defines the priorities for using the encryption algorithms.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
encryption-algorithm-lte priority1 128-eea { 0 | 1 | 2 } priority2 128-eea { 0 | 1 | 2 }
priority3 128-eea { 0 | 1 | 2 }
priority3 128-eea { 0 | 1 | 2 }
remove encryption-algorithm-lte
remove
Deletes the priorities definition from the call control profile configuration.
priority1 128-eea { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eea
to define the algorithm being given first priority.
priority2 128-eea { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eea
to define the algorithm being given second priority.
priority3 128-eea { 0 | 1 | 2 }
Enter 0, 1, or 2 at the end of
128-eea
to define the algorithm being given third priority.
Usage
Set the order or priority in which the MME will select a 128-EEA algorithm for use. All three priorities must
be set or the definition is invalid. The command can be re-entered to change the priorities without removing
the configuration.
be set or the definition is invalid. The command can be re-entered to change the priorities without removing
the configuration.
Example
Configure 128-EEA2 as first priority encryption algorithm:
encryption-algorithm-lte priority1 128-eea 2 priority2 128-eea 0
priority3 128-eea 1
priority3 128-eea 1