Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
encryption-algorithm-umts ▀
Command Line Interface Reference, StarOS Release 18 ▄
1969
encryption-algorithm-umts
Defines the priorities for using the encryption algorithms.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
encryption-algorithm-umts { uea0 | uea1 | uea2 } [ then-uea# | then-uea# ]
no encryption-algorithm-lte
no
Deletes the priorities definition from the call control profile configuration.
{
uea0 | uea1 | uea2
}
Enter one of the three options to define the first priority algorithm.
[ then-uea# | then-uea# ]
If a second algorithm is to be included as an option, give it second priority. Enter 0, 1, or 2 at the end of
then-uea
to define the algorithm being given second priority.
then-uea#
If a third algorithm is to be included as an option, give it third priority. Enter 0, 1, or 2 at the end of
then-
uea
to define the algorithm being given third priority.
Usage
Set the order or priority in which the SGSN will select a UEA algorithm for use. It is not necessary to define
priorities for all three priority levels. The command can be re-entered to change the priorities without
removing the configuration.
priorities for all three priority levels. The command can be re-entered to change the priorities without
removing the configuration.
Example
Configure algorithm UEA2 as the first priority encryption algorithm with no others to be considered:
encryption-algorithm-umts uea2