Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
▀ tech-support test-commands password
▄ Command Line Interface Reference, StarOS Release 18
5588
tech-support test-commands password
Configures the password that protects access to the
cli test-commands
mode in the Exec mode and Global
Configuration mode. This command is only visible to a user logged in as a Security Administrator.
Product
All
Privilege
Security Administrator
Caution:
The cli test-commands are for use by or under the supervision of Cisco TAC.
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
tech-support test-commands [encrypted] password new_password
no tech-support test-commands password
no
Disables the use of a test-commands password. All subsequent attempts to execute
cli test-commands
in
Exec or Global Configuration modes will fail.
Default: no password, access disabled
Default: no password, access disabled
[encrypted]
If this optional keyword is specified, the
new_password
is interpreted as an encrypted string containing the
password value. If the encrypted keyword is not specified, then
new_password
is interpreted as the actual
plain text value. In the output of
show configuration
and
save configuration
commands, only the
encrypted option of this command syntax appears.
new_password
Specifies the password to be used when executing the
cli test-commands
command in Exec or Global
Configuration modes. For a plain text password,
new_password
is an alphanumeric string of 1 through 64
characters. For an encrypted password,
new_password
is an alphanumeric string of 1 through 524
characters.
If a password is not entered via this command, the
If a password is not entered via this command, the
cli test-commands
command remains disabled in the
Exec and Global Configuration modes.
Default: no password, access disabled
Default: no password, access disabled
Important:
An SNMP trap is generated when an administrator enters or edits a password via this command
(starTechSupportPasswordChanged). Refer to the SNMP MIB Reference for additional information.