Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
▀ task facility sessmgr
▄ Command Line Interface Reference, StarOS Release 18
5586
task facility sessmgr
Configures system information which is accessible via SNMP.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
task { facility sessmgr start { aggressive | normal }
facility sessmgr start { aggressive | normal }
Default: Normal
Specifies the facility options for the session manager.
Specifies the facility options for the session manager.
aggressive
: specifies the maximum number of session manager processes are started immediately.
Caution:
The
task facility sessmgr start aggressive
command should only be used if the system
will reach capacity (for the existing configuration) during the first few minutes of service.
Caution:
This command must only be executed last during configuration (or appended to the end of the
configuration file) to ensure the availability of memory resources to contexts and services.
normal
: indicates the session manager processes are started as needed.
Usage
Set the session manager start policy to aggressive on heavily utilized systems to avoid undue delays in
processing subscriber sessions.
processing subscriber sessions.
Example
task facility sessmgr start aggressive
task facility sessmgr start normal