Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
threshold aaamgr-request-queue ▀
Command Line Interface Reference, StarOS Release 18 ▄
5609
threshold aaamgr-request-queue
Configures the AAA Manager internal request queue, alarm or alert thresholds.
Product
PDSN
GGSN
HA
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold aaamgr-request-queue high_thresh [ clear low_thresh ]
default threshold aaamgr-request-queue
high_thresh
Default: 0
Specifies the high threshold number of AAA Manager Requests that must be met or exceeded within the
polling interval to generate an alert or alarm.
Specifies the high threshold number of AAA Manager Requests that must be met or exceeded within the
polling interval to generate an alert or alarm.
high_thresh
is an integer from 1 through 100.
clear
Allows the configuration of Specifies the low threshold.
low_thresh
Default: 5
Specifies the low threshold number of AAA Manager Requests that maintains a previously generated alarm
condition. If the percentage of failures falls beneath the low threshold within the polling interval, a clear
alarm is generated.
Specifies the low threshold number of AAA Manager Requests that maintains a previously generated alarm
condition. If the percentage of failures falls beneath the low threshold within the polling interval, a clear
alarm is generated.
low_thresh
is an integer from 0 through 100.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
AAA Manager Request thresholds generate alerts or alarms based on the number of AAA Manager Requests
for an AAA manager process during the specified polling interval.
Alerts or alarms are triggered for AAA Manager Requests based on the following rules:
for an AAA manager process during the specified polling interval.
Alerts or alarms are triggered for AAA Manager Requests based on the following rules: