Cisco Cisco Packet Data Interworking Function (PDIF)
SBc Service Configuration Mode Commands
▀ associate
▄ Command Line Interface Reference, StarOS Release 18
8420
associate
This new command specifies the SCTP parameter template to employ for this SBc-AP interface.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > SBc Service Configuration
configure > context context_name > sbc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sbc-service)#
Syntax
associate sctp-param-template sctp_param_template_name
no associate sctp-param-template
no
Disassociates the specified SCTP Parameter Template from this SBc service.
sctp-param-template sctp_param_template_name
Associates the previously created SCTP Parameter Template with this SBc service.
sctp_param_template_name
must be an alphanumeric string of 1 through 63 characters.
Usage
Associates a previously created SCTP Parameter Template with this SBc service.
Configuration of the SCTP Parameter template is a pre-requisite for this command.
Changes to the configuration will restart the SBc service.
Associating the SBc service to the SCTP parameter template is not required for the SBc service to be
operational.
Refer to the
Configuration of the SCTP Parameter template is a pre-requisite for this command.
Changes to the configuration will restart the SBc service.
Associating the SBc service to the SCTP parameter template is not required for the SBc service to be
operational.
Refer to the
sctp-param-template
command in the Global Configuration Mode Commands (L-S) chapter
for more information about configuring a SCTP Parameter Template.