Cisco Cisco Packet Data Interworking Function (PDIF)
Service Redundancy Protocol Configuration Mode Commands
hello-interval ▀
Command Line Interface Reference, StarOS Release 18 ▄
8483
hello-interval
Defines the lapse time between sending the hello message.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
hello-interval interval
default hello-interval
default
Resets the hello interval to the default setting of 10 seconds.
interval
Specifies the lapse time (in seconds) between sending the hello message.
interval
must be an integer from
1 through 65535. Default = 10.
Usage
This command configures the hello interval - the amount of time that lapses between the sending of each
hello message. Each chassis sends the other chassis a hello message at the expiration of every hello interval.
hello message. Each chassis sends the other chassis a hello message at the expiration of every hello interval.
Example
The following example sets the hello interval to 35 seconds:
hello-interval 35