Cisco Cisco Packet Data Interworking Function (PDIF)
APN Profile Configuration Mode
qos dedicated-bearer ▀
Command Line Interface Reference, StarOS Release 17 ▄
1535
qos dedicated-bearer
Configures the quality of service maximum bit rate (MBR) parameters for the dedicated bearer. This command is
specific to the MME.
specific to the MME.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
qos dedicated-bearer mbr max-ul mbr-up max-dl mbr-dwn
remove qos dedicated-bearer
remove
Removes the dedicated bearer maximum bit rate (MBR) changes from the configuration for this APN profile.
max-ul mbr-up
max-dl
mbr-dl
Defines the maximum bit rates for uplink and downlink traffic.
mbr-up
is an integer from 0 through 1410065408.
mbr-dl
is an integer from 0 through 1410065408.
Usage
Use this command to define the MBRs that will be enforced by the P-GW for both uplink and downlink
traffic shaping.
traffic shaping.
Example
qos dedicated-bearer mbr max-ul 24234222 max-dl 23423423