Cisco Cisco Packet Data Interworking Function (PDIF)
APN Profile Configuration Mode
▀ qos default-bearer
▄ Command Line Interface Reference, StarOS Release 17
1536
qos default-bearer
Configures the quality of service parameters for the default bearer. This command is specific to the MME.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
qos default-bearer { arp arp_value [ preemption-capability { may | shall-not } |
vulnerability { not-preemptable | preemptable } ] | qci qci }
vulnerability { not-preemptable | preemptable } ] | qci qci }
remove qos default-bearer { arp | qci }
remove
Removes the default bearer QoS configuration from this APN profile.
arp
arp_value
Defines the address retention priority value.
arp_value
is an integer from 1 through 15.
preemption-capability { may | shall-not }
Specifies the preemption capability flag. Options are:
may
: Bearer may be preempted
shall-not
: Bearer shall not be preempted
vulnerability { not-preemptable | preemptable }
Specifies the vulnerability flag. Options are:
not-preemptable
: Bearer cannot be preempted.
preemptable
: Bearer can be preempted.
qci qci
Specifies the QoS Class Identifier for the default bearer profile.
qci
is an integer from 0 through 255.
Usage
Use this command to set the QoS APR and QCI parameters for the default bearer configuration.
Example