Cisco Cisco Packet Data Interworking Function (PDIF)
ATM Port Configuration Mode Commands
▀ snmp trap link-status
▄ Command Line Interface Reference, StarOS Release 17
1588
snmp trap link-status
Enables/disables the generation and sending of an SNMP (notification) trap when the port experiences a change of state
(up or down).
(up or down).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ATM Port Configuration
configure > port atm slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
[ no ] snmp trap link-status
no
Disables the sending of traps for link-status changes.
Usage
Enable the sending of link-status change traps for this port if there is a monitoring facility that can use the
information or if there are troubleshooting activities in progress.
information or if there are troubleshooting activities in progress.
Example
Use the following command to send SNMP link-status traps for this port:
snmp trap link-status
Use the following command to disable the sending SNMP link-status traps for this port:
no snmp trap link-status