Cisco Cisco Packet Data Interworking Function (PDIF)
DHCPv6 Service Configuration Mode Commands
dhcpv6-client ▀
Command Line Interface Reference, StarOS Release 17 ▄
3491
dhcpv6-client
Enters the DHCPv6 Client Configuration Mode.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCPv6 Service Configuration
configure > context context_name > dhcpv6-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcpv6-service)#
Syntax
dhcpv6-client
Usage
Use this command to cause the system to enter the DHCPv6 Client Configuration Mode where parameters are
configured for the DHCPv6 client.
Entering this command results in the following prompt:
configured for the DHCPv6 client.
Entering this command results in the following prompt:
[context_name]hostname(config-dhcpv6-client)#
DHCPv6 Client Configuration Mode commands are defined in the DHCPv6 Client Configuration Mode
Commands chapter.
Commands chapter.