Cisco Cisco Packet Data Interworking Function (PDIF)
DHCPv6 Service Configuration Mode Commands
▀ dhcpv6-server
▄ Command Line Interface Reference, StarOS Release 17
3492
dhcpv6-server
Enters the DHCPv6 Server Configuration Mode.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCPv6 Service Configuration
configure > context context_name > dhcpv6-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcpv6-service)#
Syntax
dhcpv6-server
Usage
Use this command to cause the system to enter the DHCPv6 Server Configuration Mode where parameters
are configured for the DHCPv6 server.
Entering this command results in the following prompt:
are configured for the DHCPv6 server.
Entering this command results in the following prompt:
[context_name]hostname(config-dhcpv6-server)#
DHCPv6 Server Configuration Mode commands are defined in the DHCPv6 Server Configuration Mode
Commands chapter.
Commands chapter.
Important:
Multiple DHCPv6 servers can be configured by entering the
dhcpv6-server
command multiple
times. A maximum of 3 DHCPv6 servers can be configured.