Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Configuration Mode Commands
nat ip downlink reassembly-timeout ▀
Command Line Interface Reference, StarOS Release 17 ▄
517
nat ip downlink reassembly-timeout
This command configures the downlink IP reassembly timer.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
[ default ] nat ip downlink reassembly-timeout timeout
default
Configures this command with its default setting.
Default: 2000 milliseconds
Default: 2000 milliseconds
timeout
The maximum duration for which IP packet fragments can be retained, in milliseconds.
timeout
must be an integer from 1 through 30000.
Usage
Use this command to configure the downlink IP reassembly timer by setting the duration for which IP packet
fragments can be retained.
fragments can be retained.
Example
The following command configures the duration for IP packet fragments with a timeout setting of
3000
seconds:
nat ip downlink reassembly-timeout 3000