Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Configuration Mode Commands
▀ nat tcp-2msl-timeout
▄ Command Line Interface Reference, StarOS Release 17
518
nat tcp-2msl-timeout
This command allows you to configure the TCP 2MSL (Maximum Segment Lifetime) timeout value for NAT.
Important:
This command is available only in StarOS 8.3 and later releases.
Product
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration
active-charging service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs)#
Syntax
nat tcp-2msl-timeout timeout
default nat tcp-2msl-timeout
default
Configures this command with its default setting.
Default: 60 seconds
Default: 60 seconds
timeout
Specifies the TCP 2MSL timeout period, in seconds.
timeout
must be an integer from 30 through 240.
Usage
Use this command to configure the TCP 2MSL timeout value for NAT.
Example
The following command configures the TCP 2MSL timeout for NAT to
120
seconds:
nat tcp-2msl-timeout 120