Cisco Cisco Packet Data Interworking Function (PDIF)
Link Configuration Mode Commands
▀ mtp2-aerm-normal-threshold
▄ Command Line Interface Reference, StarOS Release 17
6822
mtp2-aerm-normal-threshold
Configure the alignment error rate monitor (AERM) normal threshold value. This command is only available for a
lowspeed-narrowband link-type.
lowspeed-narrowband link-type.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
mtp2-aerm-normal-threshold value
default mtp2-aerm-normal-threshold
default
Resets the parameter to the default value of 4.
value
value
: Enter an integer from 4 to 100. Default: 4.
Usage
This command sets the normal threshold for the MTP2 alignment error rate monitor.
Example
Set the normal AERM threshold to 55:
mtp2-aerm-normal-threshold 55