Cisco Cisco Packet Data Interworking Function (PDIF)
Link Configuration Mode Commands
▀ mtp2-eim-increment
▄ Command Line Interface Reference, StarOS Release 17
6824
mtp2-eim-increment
Configure the errored interval monitor (EIM) emergency increment value. This command is only available for a
highspeed-narrowband link-type.
highspeed-narrowband link-type.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SS7 Routing Domain Configuration > Linkset Configuration > Link Configuration
configure > ss7-routing-domain domain_id variant var_type > linkset id linkset_id > link
id link_id
id link_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-ss7-rd-linkset-linkset_id-link-link_id)#
Syntax
mtp2-eim-increment value
default mtp2-eim-increment
default
Resets the parameter to the default value of 198.
value
value
: Enter an integer from 1 to 1023. Default: 198.
Usage
This command sets the emergency increment value for the EIM.
Example
Set the EIM emergency increment to 2:
mtp2-eim-increment 2