Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Rulebase Configuration Mode Commands
p2p dynamic-flow-detection ▀
Command Line Interface Reference, StarOS Release 17 ▄
741
p2p dynamic-flow-detection
This command allows you to enable/disable the P2P analyzer to detect peer-to-peer (P2P) applications.
Product
ADC
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Rulebase Configuration
active-charging service service_name > rulebase rulebase_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-rule-base)#
Syntax
[ default | no ] p2p dynamic-flow-detection
default
Configures this command with its default setting.
Default: Disabled
Default: Disabled
no
If previously enabled, disables P2P dynamic flow detection in the current rulebase.
p2p dynamic-flow-detection
Enables dynamic P2P flow detection.
Usage
Use this command to enable dynamic-flow detection. This allows the P2P analyzer to detect the P2P
applications configured for the ACS.
applications configured for the ACS.