Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
S-GW Service Configuration Mode Commands
reporting-action ▀
Command Line Interface Reference, StarOS Release 17 ▄
8627
reporting-action
Configures the system to start reporting session events.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
[ no ] reporting-action event-record [ trigger active-idle ]
default reporting-action event-record
default
Returns the command to its default setting of disabled.
no
Disables session event reporting.
trigger active-idle
Specifies that the event is only to be reported upon the going from active to idle.
Usage
Use this command to enable the session event reporting feature on the S-GW.
Example
The following command enables event reporting but does not limit it to events triggered by going active to
idle:
idle:
reporting-action event-record