Cisco Cisco Packet Data Gateway (PDG)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
Card Configuration Mode Commands
shutdown ▀
Command Line Interface Reference, StarOS Release 16 ▄
2095
shutdown
Configures a card for active service or terminates all processes on the card.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-card- slot_number)#
Syntax
[ no ] shutdown
no
no shutdown
enables the card.
Enter only the
shutdown
keyword to shut the card down.
Usage
Shut down a card to remove it from service or to enable a card to put it into service.
Important:
Do not use this command to remove a card from service for maintenance. Use the command
card
halt
to remove a card for service to avoid changing or deleting the active-mode configuration. See the Exec Mode
chapter.
Important:
Not supported on all platforms
Example
The following command shuts down the card:
shutdown
The following command switches the card to online:
no shutdown