Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
dns-sgw ▀
Command Line Interface Reference, StarOS Release 16 ▄
1895
dns-sgw
Defines the context to be used to do DNS lookup for S-GWs.
Product
MME
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] dns-sgw context ctxt_name
remove
Deletes this definition from the call control profile.
context
ctxt_name
Specifies the context to be used to do DNS lookup for S-GWs as an alphanumeric string of 1 through 64
characters.
This command must be used to configure DNS client settings when using dynamic S-GW selection where the
tai-mgmt-db has been associated with a call-control-profile.
On the S4-SGSN, this specifies the name of the context where the DNS client is configured that will be used
for DNS resolution of S-GWs. If dns-sgw context is not specified, the S4-SGSN uses the DNS client
configured in the context where the eGTP service is configured to query the S-GW DNS address.
characters.
This command must be used to configure DNS client settings when using dynamic S-GW selection where the
tai-mgmt-db has been associated with a call-control-profile.
On the S4-SGSN, this specifies the name of the context where the DNS client is configured that will be used
for DNS resolution of S-GWs. If dns-sgw context is not specified, the S4-SGSN uses the DNS client
configured in the context where the eGTP service is configured to query the S-GW DNS address.
Usage
Use this command to configure the context ID for the DNS lookup.
Example
dns-sgw context sgw1