Cisco Cisco Packet Data Interworking Function (PDIF)
Card Configuration Mode Commands
initial-e1-framing ▀
Command Line Interface Reference, StarOS Release 16 ▄
2085
initial-e1-framing
Configures the type of framing mode that will initially be available at the time the line card boots. (ASR 5000 only)
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Card Configuration
configure > card card_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-card- slot_number)#
Syntax
initial-e1-framing [ crc4 | standard ]
default initial-e1-framing
default
Returns the configuration to CRC4 as the default type.
crc4
Accepts the default CRC4, in the configuration, as the initial at-boot framing mode.
standard
Accepts the
standard
mode as the initialization framing mode.
Usage
For a CLC-type line card, the default E1 framing mode is CRC4. When a card reboots, all E1s are initialized
with CRC4 framing mode and then switch to the configured framing mode. With this keyword, you have the
option to choose the initialization framing mode.
with CRC4 framing mode and then switch to the configured framing mode. With this keyword, you have the
option to choose the initialization framing mode.
Important:
Only supported on CLC/CLC2
Example
initial-e1-framing standard