Cisco Cisco Packet Data Interworking Function (PDIF)
Ethernet Interface Configuration Mode Commands
▀ ip ospf retransmit-interval
▄ Command Line Interface Reference, StarOS Release 16
3616
ip ospf retransmit-interval
Configures the interval in (seconds) between LSA (Link State Advertisement) retransmissions.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-eth)#
Syntax
ip ospf retransmit-interval seconds
no ip ospf retransmit-interval
no
Returns the value to its default of 5 seconds.
seconds
Specifies the number of seconds between LSA (Link State Advertisement) retransmissions as an integer from
1 through 65535. Default: 5
1 through 65535. Default: 5
Usage
Configure the interval in (seconds) between LSA (Link State Advertisement) retransmissions.
Example
To set the retransmit-interval to
10
, use the following command;
ip ospf retransmit-interval 10