Cisco Cisco Packet Data Interworking Function (PDIF)
Ethernet Interface Configuration Mode Commands
ip ospf transmit-delay ▀
Command Line Interface Reference, StarOS Release 16 ▄
3617
ip ospf transmit-delay
Configures the interval (in seconds) that the router should wait before transmitting an OSPF packet.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Ethernet Interface Configuration
configure > context context_name > interface interface_name broadcast
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-if-eth)#
Syntax
ip ospf transmit-delayseconds
no ip ospf transmit-delay
no
Returns the value to its default of 1 second.
seconds
Specifies the number of seconds that the router should wait before transmitting a packet as an integer from 1
through 65535. Default: 1
through 65535. Default: 1
Usage
Configure the interval (in seconds) that the router should wait before transmitting an OSPF packet.
Example
To set the transmit-delay to
5
, use the following command;
ip ospf transmit-delay 5