Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
▀ threshold dcca-rating-failed
▄ Command Line Interface Reference, StarOS Release 16
5506
threshold dcca-rating-failed
Configures Diameter Credit Control Application (DCCA) Rating Group (content-id) request reject, alarm or alert
thresholds.
thresholds.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold dcca-rating-failed high_thresh [ clear low_thresh ]
default threshold dcca-rating-failed
default
Disables the threshold for configured alarm and sets the
high_thresh
and
low_thresh
values to 0.
high_thresh
Default: 0
Specifies the high threshold number of requests for a block of credits due to invalid Rating Group (content-
id), rejected from the Diameter server that must be met or exceeded within the polling interval to generate an
alert or alarm.
Specifies the high threshold number of requests for a block of credits due to invalid Rating Group (content-
id), rejected from the Diameter server that must be met or exceeded within the polling interval to generate an
alert or alarm.
high_thresh
is an integer from 0 through 1000000.
clear
low_thresh
Default: 0
Specifies the low threshold number of requests for a block of credits due to invalid Rating Group (content-id),
rejected from the Diameter server that maintains a previously generated alarm condition. If the number of
errors falls beneath the low threshold within the polling interval, a clear alarm will be generated.
Specifies the low threshold number of requests for a block of credits due to invalid Rating Group (content-id),
rejected from the Diameter server that maintains a previously generated alarm condition. If the number of
errors falls beneath the low threshold within the polling interval, a clear alarm will be generated.
low_thresh
is an integer from 0 through 1000000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
In the event that the Diameter server rejects the system request for a block of credits due to invalid Rating
Group, defined as content-id, dcca-rating-failed message is generated.
Group, defined as content-id, dcca-rating-failed message is generated.