Cisco Cisco Packet Data Interworking Function (PDIF)
IPSG RADIUS Server Configuration Mode Commands
▀ map ue-mac-to-imei
▄ Command Line Interface Reference, StarOS Release 16
6460
map ue-mac-to-imei
This command allows you to map the UE MAC received in the Calling-Station-Id RADIUS attribute to IMEIsV in
order to forward it in the GTP CPC message to the GGSN.
order to forward it in the GTP CPC message to the GGSN.
Product
eWAG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-server)#
Syntax
[ default | no ] map ue-mac-to-imei
default
If previously configured, disables mapping of UE MAC address to IMEIsV IE of GTP message in order to
forward it to GGSN.
Default: Mapping is disabled.
forward it to GGSN.
Default: Mapping is disabled.
no
If previously configured, disables mapping of UE MAC address to IMEIsV IE of GTP message in order to
forward it to GGSN.
forward it to GGSN.
Usage
Use this command to enable or disable mapping of UE MAC address to IMEIsV IE of GTP message in order
to forward it to GGSN.
to forward it to GGSN.