Cisco Cisco Packet Data Interworking Function (PDIF)
IPSG RADIUS Server Configuration Mode Commands
▀ plmn id
▄ Command Line Interface Reference, StarOS Release 16
6462
plmn id
This command allows you to configure Public Land Mobile Network (PLMN) identifier for the current eWAG service.
Product
eWAG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ipsg-service-radius-server)#
Syntax
plmn id mcc mcc_number mnc mnc_number
no plmn id
no
If previously configured, deletes the PLMN ID configuration.
mcc mcc_number
Specifies the mobile country code (MCC) part of the PLMN identifier for the eWAG service.
mcc_number
must be a three-digit number ranging from 200 to 999.
mnc mnc_number
Specifies the mobile network code (MNC) part of the PLMN identifier for the eWAG service.
mnc_number
must be a two- or three-digit number ranging from 00 to 999.
Usage
Use this command to configure the location-specific mobile network identifiers included in the Routing Area
Identity (RAI) field of the PDP Create Request messages sent to the GGSN.
Identity (RAI) field of the PDP Create Request messages sent to the GGSN.
Important:
Any change to this configuration will result in restart of the eWAG service.
Example
The following command configures the PLMN identifier for the eWAG service as MCC
333
and MNC
99
:
plmn id mcc 333 mnc 99