Cisco Cisco Packet Data Gateway (PDG)

Descargar
Página de 655
P-GW Changes in Release 17   
▀  P-GW Enhancements for 17.1 
 
 
▄  Release Change Reference, StarOS Release 17 
380 
   
 
Diameter (Gy) Server has configuration as: --result-code 5030 
 
P-GW GTP cause in Create Session Response is USER_AUTHENTICATION_FAILED. 
CSCur51701 - Disconnect Reason Not Updated correctly For Saegw-collapsed 
call 
Feature Changes 
P-GW and SAEGW Session Disconnect Reason Not Updated Correctly for Multi Bearer Call 
 
Previous Behavior:   When the first dedicated bearer was released for P-GW and SAEGW calls for a multi bearer call, 
the disconnect reason was set for all bearers. Other bearers went down with different disconnect reasons and the new 
disconnect reason was not updated in the bearers. Therefore, the 
show session disconnect
 reason displayed the 
wrong output. 
New Behavior:   When the first dedicated bearer is released for P-GW and SAEGW calls for a multi bearer call, the 
disconnect reason is only set to specific bearers. After other bearers go down with a different disconnect reason, the new 
disconnect reasons is updated correctly in the bearers. Therefore, the 
show session disconnect
 reason will display 
the correct output.  
CSCur52706 - PGW/GGSN: Disc-reason Bulkstats verifiction reqd for 
CSCur33479 
Performance Indicator Changes 
show pgw-service statistics
 
The following counter has been added under PDNs Rejected By Reason section: 
 
Apn-Denied No Subscription 
CSCur47338 - [SysTest] audit-gtpumgr-failure CRR recovery failures observed 
Feature Changes 
SM and GTPUMGR Behavior for Same Remote TEID
 
Initially, there was inconsistency between sm and gtpumgr if dedicated bearer had the same remote TEID for the same 
peer. In gtpumgr, the old bearer was replaced by a new bearer; in sm, P-GW kept both bearers. 
Previous Behavior:  If both bearers have same remote TEID, then gtpumgr removed old bearer and replaced with a 
new bearer; however, sm kept both bearers. 
New Behavior:  Now, both sm and gtpumgr keep only the new bearer and old bearer is deleted/removed from the sm 
and gtpumgr.