Cisco Cisco Packet Data Gateway (PDG) Prospecto
MME Service Configuration Mode Commands
▀ policy sctp-down
▄ Cisco ASR 5x00 Command Line Interface Reference
6978
policy sctp-down
Configures how the MME responds to a failure of the Stream Control Transmission Protocol (SCTP) connection from
the eNodeB.
the eNodeB.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
policy sctp-down { detach-ue | idle-mode-entry }
default policy sctp-down
default
Returns the command to its default setting of
idle-mode-entry
.
{ detach-ue | idle-mode-entry }
Specifies the action to perform when the SCTP connection from the eNodeB fails.
detach-ue
: Specifies that UEs are to be detached from the service upon SCTP failure.
idle-mode-entry
: Specifies that UEs are to be placed into an idle mode condition upon SCTP failure.
Usage
Use this command to configure how the MME reacts to an SCTP connection failure condition.
Example
The following command configures the MME to place UEs into an idle state while the SCTP connection
from the eNodeB fails:
from the eNodeB fails:
sctp-down idle-mode-entry