Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Diameter Endpoint Configuration Mode Commands
▀ origin realm
▄ Cisco ASR 5x00 Command Line Interface Reference
3346
origin realm
This command configures the realm to use in conjunction with the origin host.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
[ no ] origin realm realm_name
no
Removes the origin realm configuration.
realm_name
Specifies the realm to bind the Diameter endpoint. The
realm_name
must be an alphanumeric string of 1
through 127 characters. The realm is the Diameter identity. The originator’s realm must be present in all
Diameter messages. The origin realm can typically be a company or service name.
Diameter messages. The origin realm can typically be a company or service name.
Usage
Use this command to set the realm for the Diameter endpoint.
Diameter agent on the chassis listens to standard TCP port 3868 and also supports the acceptance of any
incoming TCP connection from external server.
Diameter agent on the chassis listens to standard TCP port 3868 and also supports the acceptance of any
incoming TCP connection from external server.
Example
The following command sets the origin realm to
companyx
:
origin realm companyx