Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Diameter Endpoint Configuration Mode Commands
peer ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3347
peer
This command specifies a peer address for the Diameter endpoint.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Diameter Endpoint Configuration
configure > context context_name > diameter endpoint endpoint_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-diameter)#
Syntax
peer [*] peer_name [*] [ realm realm_name ] { address ipv4/ipv6_address [ [ port
port_number ] [ connect-on-application-access ] [ send-dpr-before-disconnect disconnect-
cause disconnect_cause ] [ sctp ] ] + | fqdn fqdn [ [ port port_number ] [ send-dpr-
before-disconnect disconnect-cause disconnect_cause ] [ rlf-template rlf_template_name ]
] }
port_number ] [ connect-on-application-access ] [ send-dpr-before-disconnect disconnect-
cause disconnect_cause ] [ sctp ] ] + | fqdn fqdn [ [ port port_number ] [ send-dpr-
before-disconnect disconnect-cause disconnect_cause ] [ rlf-template rlf_template_name ]
] }
no peer peer_name [ realm realm_name ]
no
Removes the specified peer configuration.
[*] peer_name [*]
Specifies the peer’s name as an alphanumeric string of 1 through 63 characters that allows punctuation
characters.
The Diameter server endpoint can now be a wildcarded peer name (with * as a valid wildcard character).
Client peers which satisfy the wild-carded pattern are treated as valid peers and the connection will be
accepted. The wildcarded token indicates that the peer name is wildcarded and any ‘*’ in the preceding string
is treated as a wildcard.
characters.
The Diameter server endpoint can now be a wildcarded peer name (with * as a valid wildcard character).
Client peers which satisfy the wild-carded pattern are treated as valid peers and the connection will be
accepted. The wildcarded token indicates that the peer name is wildcarded and any ‘*’ in the preceding string
is treated as a wildcard.
realm realm_name
Specifies the realm of this peer as an alphanumeric string of 1 through 127 characters. The realm name can be
a company or service name.
a company or service name.
address ipv4/ipv6_address
Specifies the Diameter peer IP address in IPv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
This address must be the IP address of the device with which the chassis is communicating.
This address must be the IP address of the device with which the chassis is communicating.
fqdn fqdn
Specifies the Diameter peer FQDN as an alphanumeric string of 1 through 127 characters.