Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (D-S)
gtpp test ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3881
gtpp test
Tests communication with configured charging gateway function (CGF) severs or a GTPP Storage-Server.
Product
GGSN
P-GW
SAEGW
Privilege
Operator, Config-Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
gtpp test { accounting { all | cgf-server cgf_address | group name group_name } |
storage-server [ address ip-addr port udp-port | group name group_name ] }
storage-server [ address ip-addr port udp-port | group name group_name ] }
all
Tests all CGFs configured within the given context.
cgf-server
cgf_address
Tests a CGF configured within the given context and specified by the IP address of the CGF entered using
IPv4 dotted-decimal notation.
IPv4 dotted-decimal notation.
group name
group_name
Tests the storage server for an existing group name specified as an alphanumeric string of 1 through 63
characters.
characters.
storage-server [ address
ip-address
port
udp-port]
Tests the connectivity and provides round trip time for the echo request sent to the GTPP Storage-Server
configured in the requested context. The IP address of the GSS is entered using IPv4 dotted-decimal notation
and the UPD port is the one defined for the GTPP Storage Server.
configured in the requested context. The IP address of the GSS is entered using IPv4 dotted-decimal notation
and the UPD port is the one defined for the GTPP Storage Server.
Usage
This command is used to verify the configuration of and test the system’s ability to communicate with one or
all configured GSS/CGFs for monitoring or troubleshooting purposes.
When executed, this command causes the system to send GTPP echo packets to the specified GSS/CGF(s).
The command’s response will display whether the GSS/CGF is active or unreachable.
all configured GSS/CGFs for monitoring or troubleshooting purposes.
When executed, this command causes the system to send GTPP echo packets to the specified GSS/CGF(s).
The command’s response will display whether the GSS/CGF is active or unreachable.
Example
The following command tests communication with a CGF having an IP address of
192.168.1.5
: