Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
Exec Mode Commands (D-S)
gtpu test echo ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3883
gtpu test echo
Tests the ability of a GGSN/P-GW/SAEGW/SGSN/S-GW service to exchange GTP-U echo request messages with
specified peer(s).
specified peer(s).
Product
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Operator, Config-Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
StarOS v12.x and earlier:
gtpu test echo src-address gn_address { all | sgsn-address ip_address }
StarOS v14.0 and later:
gtpu test echo gtpu-service service_name { all | peer-address ip_address } [ gtpu-version
{ 0 | 1 } ]
{ 0 | 1 } ]
src-address
gn_address
Specifies the IP address of a Gn interface configured on the system using IPv4 dotted-decimal notation.
Important:
The IP address of the system’s Gn interface must be bound to a configured GGSN service prior to
executing this command.
all
Sends GTP-U echo requests to all SGSNs that currently have sessions with the GGSN service.
sgsn-address
ip_address
Sends GTP-U echo requests to an SGSN specified by its IP address in IPv4 dotted-decimal notation.
gtpu-service service_name
Specifies an existing GTP-U service.
service_name
is an alphanumeric string of 1 through 63 characters.