Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
GGSN Service Configuration Mode Commands
▀ authorize-with-hss
▄ Cisco ASR 5x00 Command Line Interface Reference
4936
authorize-with-hss
This command enables or disables subscriber session authorization via a Home Subscriber Server (HSS) over an S6b
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Diameter interface. This feature is required to support the interworking of GGSN with P-GW and HA.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
authorize-with-hss [ report-ipv6-addr ]
[ default | no ] authorize-with-hss
no
Disables the default authorization of subscriber over S6b interface. Resets the command to the default setting
of “authorize locally” from an internal APN authorization configuration.
of “authorize locally” from an internal APN authorization configuration.
report-ipv6-addr
Enables the IPv6 address reporting through Authorization-Authentication-Request (AAR) towards the S6b
interface.
interface.
Usage
Use this command to enable/disable the authorization support for subscriber over S6b interface, which is used
between GGSN and the 3GPP AAA to exchange the information related to charging, P-CSCF discovery, etc.
By use of this feature allows the GGSN service to interact with HSS over S6b interface through Diameter
configuration which is already configured on the system.
between GGSN and the 3GPP AAA to exchange the information related to charging, P-CSCF discovery, etc.
By use of this feature allows the GGSN service to interact with HSS over S6b interface through Diameter
configuration which is already configured on the system.
Important:
Diameter configuration must be available before enabling this command. For more information of
Diameter interface configuration, refer Diameter Endpoint Configuration Mode Commands chapter.
Important:
This command is a license-enabled feature.
Example
The following command enables the subscriber authorization via an HSS over an S6b Diameter interface to
provide session interoperability between GGSN and PGW and HA in this GGSN service:
provide session interoperability between GGSN and PGW and HA in this GGSN service:
authorize-with-hss