Cisco Cisco Packet Data Interworking Function (PDIF) Prospecto
GGSN Service Configuration Mode Commands
bind ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
4937
bind
Binds the GGSN service to a logical IP interface serving as the Gn interface. Specifies the maximum number of
subscribers that can access this service over the interface.
subscribers that can access this service over the interface.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GGSN Service Configuration
configure > context context_name > ggsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ggsn-service)#
Syntax
bind address ip_address
no bind address ip_address
no
Removes a previously configured binding for the GGSN service.
ip_address
Specifies the IP address (address) of the interface configured as the Gn interface.
ip_address
is specified in
IPv4 dotted-decimal notation.
Usage
Used to associate or tie the GGSN service to a specific logical IP address. The logical IP address or interface
takes on the characteristics of a Gn interface. Only one interface can be bound to a service. The interface
should be configured prior to issuing this command.
takes on the characteristics of a Gn interface. Only one interface can be bound to a service. The interface
should be configured prior to issuing this command.
Example
The following command would bind the logical IP interface with the address of
192.168.3.1
to the GGSN
service:
bind address 192.168.3.1
The following command disables a binding that was previously configured:
no bind address