Cisco Cisco WAP371 Wireless-AC N Access Point with Single Point Setup Manual De Mantenimiento
4
Cisco Small Business WAP371 Wireless Access Point Administration Guide
74
LAN
This chapter describes how to configure the port, network, and clock settings of the WAP
devices.
devices.
It includes these topics:
•
•
•
•
•
Port Settings
The Port Settings page enables you to view and configure settings for the port that physically
connects the WAP device to a local area network.
connects the WAP device to a local area network.
To view and configure LAN settings:
STEP 1
Select LAN > Port Settings in the navigation area.
The Operational Status area shows the type of port used for the LAN port and the Link
characteristics, as configured in the Administrative Settings area. If the settings change
through configuration or auto negotiation, you can click Refresh to show the latest settings.
characteristics, as configured in the Administrative Settings area. If the settings change
through configuration or auto negotiation, you can click Refresh to show the latest settings.
STEP 2
Enable or disable Auto Negotiation.
•
When enabled, the port negotiates with its link partner to set the fastest link speed and
duplex mode available.
duplex mode available.
•
When disabled, you can manually configure the port speed and duplex mode.
STEP 3
If autonegotiation is disabled, select a Port Speed (10/100 Mb/s) and the duplex mode (Half-
or Full-duplex).
or Full-duplex).