Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Guía De Instalación

To verify the hardware installation, complete the following tasks:

• Check the cable connections.

• Check the state of the indicator lights.

If you need help resolving a problem, visit the Cisco Support 

Community at 

. 

Off

The Cisco WAP351 has no power.

Solid Green

The Cisco WAP351 is powered on, booting, or 
in normal operation with DC power supply.

Solid Blue

The Cisco WAP351 is powered on, booting, or 
in normal operation with PoE 802.at power 
supply.

Solid Amber

The Cisco WAP351 is powered on, booting, or 
in normal operation with PoE 802.af power 
supply.

Solid Red

The Cisco WAP351 fails to boot with both 
firmware images.

Flashing 
(Green/Blue/
Amber)

The Cisco WAP351 is upgrading the firmware, 
or is acquiring an IPv4 or IPv6 address.

Off

Wireless is disabled for both 2.4 GHz and 5 
GHz. 

Solid Green

Wireless is enabled in concurrent mode 
enabled. (The intensity needs to be the same.)

Solid Amber

Wireless is enabled with only 5 GHz in use.

Solid Blue

Wireless is enabled with only 2.4 GHz in use. 

Flashing

Transmitting or receiving data.

Off

PSE is not in use. 

Solid Green

PSE is in use. 

Off

No Ethernet link.

Solid Green

Gigabit Ethernet link is active. 

Solid Amber

Fast Ethernet link is active. 

Flashing

Transmitting or receiving data.