Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento

Using the Access Point Setup Wizard

Cisco WAP131 and WAP351 Administration Guide

12

Follow these steps to complete the wizard (you must log in again after changing 
your password):

Click Next on the Welcome page of the wizard. The Configure Device - IP Address 
window appears. 

Click Dynamic IP Address (DHCP) if you want the WAP device to receive an IP 
address from a DHCP server, or click Static IP Address to configure the IP 
address manually. For a description of these fields, see 

Click Next. The Configure Device - Set System Date and Time window appears.

Select your time zone and then set the system time manually or set up the WAP 
device to get its time from an NTP server. For a description of these options, see 

Click Next. The Configure Device - Set Password window appears.

Enter a new password in the New Password field and enter it again in the Confirm 
Password field. 

Uncheck Password Complexity if you want to disable the password 

security rules. However, we strongly recommend keeping the password security 
rules enabled. For more information about passwords, see 

Click Next. The Configure Radio 1 - Name Your Wireless Network window 
appears.

Enter a Network Name. This name serves as the SSID for the default wireless 
network.

Click Next. The Configure Radio 1 - Secure Your Wireless Network window 
appears.

Choose a security encryption type and enter a security key. For a description of 
these options, see 

.

Click Next. The Configure Radio 1 - Assign The VLAN ID For Your Wireless 
Network window appears.

Enter a VLAN ID for traffic received on the wireless network.