Cisco Cisco WAP351 Wireless-N Dual Radio Access Point with 5-Port Switch Manual De Mantenimiento

Using the Access Point Setup Wizard

Cisco WAP131 and WAP351 Administration Guide

13

We recommend that you assign a different VLAN ID from the default (1) to wireless 
traffic, in order to segregate it from management traffic on VLAN 1.

Click Next. Repeat the step 7 to step 12 to configure the settings for Radio 2 
interface. 

Click Next. The Summary - Confirm Your Settings window appears. 

Review the settings that you configured. Click Back to reconfigure one or more 
settings. If you click Cancel, all settings are returned to the previous or default 
values.

If they are correct, click Submit. Your WAP setup settings are saved and a 
confirmation window appears.

Click Finish. 

The WAP device was configured successfully. You are required to log in again with 
the new password. 

Follow these steps to complete the wizard (you must log in again after changing 
your password):

Click Next on the Welcome page of the wizard. The Configure Device - IP Address 
window appears.

Click Dynamic IP Address (DHCP) if you want the WAP device to receive an IP 
address from a DHCP server, or click Static IP Address to configure the IP 
address manually. For a description of these fields, see 

Click Next. The Single Point Setup — Set A Cluster window appears. For a 
description of Single Point Setup, see 

.

To create a new Single Point Setup of the WAP device, click Create a New Cluster 
and enter a New Cluster Name. When you configure your devices with the same 
cluster name and enable the Single Point Setup mode on other WAP devices, they 
automatically join the group.