Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE Guía De Instalación

Thank you for choosing the Cisco WAP131 Wireless-N Dual Radio Access 
Point with PoE. The Cisco WAP131 is an indoor concurrent dual-band radio 
802.11n access point with Power over Ethernet (PoE).

This guide provides the general layout of the Cisco WAP131, describe how 
to deploy the Cisco WAP131 in your network, and describe how to 
configure the Cisco WAP131. For additional information, see 

.

Before you begin the installation, make sure that you have the following 
equipment and services: 

• A computer with browser support for:

–

Internet Explorer 7.0 or later

–

Chrome 5.0 or later

–

Firefox 3.0 or later

–

Safari 3.0 or later

• One or more Ethernet network switches with PoE

The front panel of the Cisco WAP131 consists of three lights: Power, 
WLAN, and LAN. For full descriptions of the colors of the lights and their 
indications, see 

RESET—See 

 for information on the RESET button.

LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP131 
using PoE. It is an auto-sensing, Gigabit Ethernet (802.3) port used to 
connect the Cisco WAP131 to network devices, such as computers, 
routers, or switches. We strongly recommend that you use a Category 
5e or better cable for gigabit connectivity.