Cisco Cisco Aironet 1200 Access Point Notas de publicación

The conversion tool is a special utility that is used by administrators to do the following:

Create a Cisco IOS configuration using the configuration of an existing VxWorks 350 or 1200 series 
access point. 

 identifies the access points, VxWorks versions, and images supported by the 

conversion tool.

The conversion tool does not support VxWorks 350 and 1200 series access points running 
operating system version 12.04. Access points running operating system version 12.04 must be 
downgraded to a supported operating system version before using the conversion tool.

Store a Cisco IOS configuration file on your PC for later use.

Upgrade VxWorks 1200 series access points to Cisco IOS operation by combining the Cisco IOS 
configuration file with a 1200 series helper image.

Upgrade VxWorks 350 series access points to Cisco IOS operation by combining the Cisco IOS 
configuration file with a 350 series helper image.

The conversion tool does not support 802.11g radios. You must ensure that the VxWorks access 
points do not contain 802.11g radios before using the conversion tool.

To find your access point software version (Cisco IOS or VxWorks) refer to the Cisco Aironet 
Conversion Tool for Cisco IOS Software, 2.1 Administrator Guide for Windows.

The conversion tool cannot reverse the Cisco IOS upgrade process. Be sure you want to upgrade your 
access point to Cisco IOS operation before using the conversion tool.

If you want to upgrade a VxWorks 350 or 1200 series access point to Cisco IOS operation without 
preserving the existing configuration for that access point, refer to Appendix A.

AP1200
AP1220

12.03T, 12.02T1, 
12.01T1, 12.00T, 
11.56, or 11.54T

AP1200-Cisco-IOS-Upgrade-Image-v3.img

12.2(11)JA3

AP350

12.03T, 12.02T1, 
12.01T1, 12.00T, 
11.23T, or 11.21

AP350-Cisco-IOS-Upgrade-Image-v2.img

12.2(13)JA1