Cisco Cisco Aironet 1200 Access Point Notas de publicación

To find the conversion tool version number follow these steps:

On the main window of the conversion tool, right-click the conversion tool name in the title line. 

When the right-click window appears, click About CAC Tool.

The conversion tool About window appears and contains the conversion tool version number. 

To find the version of Cisco IOS running on your access point, use a Telnet session to log into the access 
point and enter the show version EXEC command. This example shows command output from an access 
point running Cisco IOS Release 12.2(13)JA: 

ap1200>show version 

Cisco Internetwork Operating System Software 

IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA 

Copyright (c) 1986-2003 by Cisco Systems, Inc. 

On access points running Cisco IOS software, you can also find the software version on the System 
Software Version page in the access point's browser interface. 

If your access point does not run Cisco IOS software, the software version appears at the top left of most 
pages in the browser interface. 

You should carefully review the following list of cautions to avoid potential problems when using the 
conversion tool.

The conversion tool automatically installs a TFTP server during the installation process and may not 
detect the presence of an existing TFTP server installed on your PC. You should deactivate the 
existing TFTP server prior to installing and using the conversion tool.

The conversion tool’s TFTP server is activated only when the conversion tool is activated. When you 
deactivate the conversion tool, the TFTP server is also deactivated.

You cannot use the conversion tool’s TFTP server for other file transfer purposes.

The Admin Name setting is not visible in the conversion tool and is displayed as a set of asterisks.