Примечания к выпуску для Cisco Cisco Aironet 1200 Access Point
8
Release Notes for Cisco Aironet Conversion Tool Version 2.1 for Cisco IOS Software
OL-6225-01
Finding the Software Version
Finding the Software Version
Conversion Tool Version
To find the conversion tool version number follow these steps:
Step 1
On the main window of the conversion tool, right-click the conversion tool name in the title line.
Step 2
When the right-click window appears, click About CAC Tool.
The conversion tool About window appears and contains the conversion tool version number.
Access Point Software Version
To find the version of Cisco IOS running on your access point, use a Telnet session to log into the access
point and enter the show version EXEC command. This example shows command output from an access
point running Cisco IOS Release 12.2(13)JA:
point and enter the show version EXEC command. This example shows command output from an access
point running Cisco IOS Release 12.2(13)JA:
ap1200>show version
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(13)JA
Copyright (c) 1986-2003 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software version on the System
Software Version page in the access point's browser interface.
Software Version page in the access point's browser interface.
If your access point does not run Cisco IOS software, the software version appears at the top left of most
pages in the browser interface.
pages in the browser interface.
Limitations and Restrictions
Conversion Tool Operating Cautions
You should carefully review the following list of cautions to avoid potential problems when using the
conversion tool.
conversion tool.
•
The conversion tool automatically installs a TFTP server during the installation process and may not
detect the presence of an existing TFTP server installed on your PC. You should deactivate the
existing TFTP server prior to installing and using the conversion tool.
detect the presence of an existing TFTP server installed on your PC. You should deactivate the
existing TFTP server prior to installing and using the conversion tool.
The conversion tool’s TFTP server is activated only when the conversion tool is activated. When you
deactivate the conversion tool, the TFTP server is also deactivated.
deactivate the conversion tool, the TFTP server is also deactivated.
Note
You cannot use the conversion tool’s TFTP server for other file transfer purposes.
•
The Admin Name setting is not visible in the conversion tool and is displayed as a set of asterisks.